From August 23 to 25, representatives from IETL Thailand visited our headquarters and research center. The purpose of this visit was to conduct the Factory Acceptance Test (FAT) for the TMDs to be applied to the RAMA IX Pedestrian Bridge.
During the FAT, various tests were carried out, including dimension verification, friction force testing, and free vibration testing. It was a meaningful opportunity for the client to directly verify the performance of our equipment.
This FAT not only allowed the client to confirm TESolution’s technical capabilities but also brought us one step closer to the successful execution of the RAMA IX Pedestrian Bridge project.

​Clients from Cambodia visited TE Solution to observe the wind tunnel testing of the pylon model for the "Korea-Cambodia Friendship Bridge."
This visit was arranged to share the progress of the wind tunnel testing project for the Friendship Bridge, currently being carried out by TESolution. The visit began with a presentation on the results of the completed deck section model test, followed by a tour of the ongoing pylon model test, where the clients observed the testing procedures in person.
The Friendship Bridge is an infrastructure project that symbolizes the cooperation and friendship between Korea and Cambodia. This visit went beyond a simple technical review, serving as a meaningful opportunity to reinforce mutual trust. Thanks for your visit!

To kick off 2025 with excitement, our entire team gathered in Cebu, Philippines, for an unforgettable workshop! Stepping away from our daily routines, we recharged, bonded, and created amazing memories in a fresh and inspiring setting. With renewed energy and enthusiasm, we’re ready to take on the year ahead with even greater passion and drive!​

ARUP, a globally renowned engineering firm, recently visited TE Solution. During their visit, we showcased our cutting-edge vibration control technologies and advanced wind tunnel testing system. The discussions were highly productive, with both parties expressing satisfaction and exploring opportunities for future collaboration.

We are pleased to announce TE Solution’s Safety and Health Management Policy and Goals for 2025.
Let's work together to make this year a safe one! 

TESolution has been officially registered as a KERI external test facility for conducting IEEE 1656 wind tunnel tests on insulation covers. This test assesses the wind resistance and durability of insulation covers, ensuring they meet the IEEE 1656-2010 EN standards by verifying stability under wind speeds exceeding 27m/s.
 
This certification marks a significant milestone for TESolution, enhancing the company's credibility and enabling it to undertake advanced wind tunnel testing. With this achievement, the company strengthens its technical presence in the domestic market and takes a substantial step forward in the wind engineering solutions industry.
 
Special thanks go to General Manager Jae-Min Kim and all contributors whose dedicated efforts made this accomplishment possible. Congratulations to everyone involved!

From November 17(Sun.) to November 23(Sat.), our team successfully carried out essential work at the Greenland Centre in Australia. This project focused on the inspection and painting of Tuned Mass Damper (TMD) installed in the building.
The maintenance operations were conducted in an organized and efficient manner, ensuring all tasks were completed as scheduled. This work plays a vital role in enhancing the performance and durability of the TMD, a critical component for the building's structural integrity.
The remarkable results achieved are a testament to the dedication and expertise of our Vibration Control Team. We extend our deepest gratitude to the team members who contributed to the success of this mission.
Thank you for your hard work and dedication!

​Last week, Vietnamese clients visited TE Solution to observe the ongoing full bridge wind tunnel test for a bridge currently being designed in Vietnam. During their visit, the presentation was given on the conditions and results of the already completed sectional model test and independent pylon test. Following the presentation, the clients had the opportunity to witness the ongoing full bridge wind tunnel test in person in our laboratory. After the observation, both parties shared a meal and engaged in conversation, further strengthening the bonds of friendship and cooperation between our companies.

TE Solution held an informative education session focused on Serious Accidents Punishment Act. The session aimed to enhance awareness and understanding among our employees regarding the critical aspects of this important legislation.

Today's session provided comprehensive insights into real-life cases applying the Act, and emphasized the responsibilities and emergency-response of individuals, including both CEO and employees. 

This was the second session for the education of the Act, and will continue two more times every two weeks. We believe that such educational sessions are essential for equipping our team with the knowledge necessary to effectively manage and mitigate risks associated with disasters.

Let's continue to build a better work environment in safety, TE Solution!